top of page

Refinishing Process

Our refinishing professionals will begin by removing old caulking and using a professional grade industrial cleaner to remove any impurities from your tub or tile, opening it's pores and promoting proper adhesion. We will then mask off all surrounding walls and tile and cover all horizontal surfaces to protect from overspray. A boot will be placed over the door and a portable ventilation system will be put in place to remove any impurities in the air. Once your home is properly protected we will begin by applying 2 coats of an epoxy primer, followed by 3 to 4 coats of an acrylic urethane resin and topcoat. All masking paper will then be removed and your tub will be recaulked, leaving you with a beautiful, high shine, new finish. A standard tub, from start to finish should take 3-4 hours while a tub and tile takes approximately 5-6. Your new refinish will be ready for use 24 hours from time of completion.

Our use of top of the line materials, coupled with our attention to detail and fine craftsmanship, is the only way to achieve the high end refinish you deserve.

bottom of page